Basic Info.
Marking Method
Scanning Marking
Power
30W
Laser Source
Huaray 3W
Pulse Duration
<22ns@40kHz
Pulse Repetition Rate Range
20-200kHz
Working Area
75-300mm (Optional)
Single Pulse Energy
>75μj@40kHz
Marking Material
Metal and Non-Metal
How to Get Focus
Double Red Dots
Control Program
Ezcad
Cooling Type
Air Cooling
Specification
90x65x150
Trademark
rayfine
Origin
China
HS Code
8456110090
Production Capacity
200
Product Description
Best price Fiber/UV/co2 flying laser marking machine from RAYFINE
UV laser marking machine will be instead of printing machinesoon~~~cold processing area, free maintenance, environmentally friendly, can mark all materials such as luxury cosmetic & iphone & charger & electronic products
Laser photo and sample show :
Parameter
| Type | RF-UV-3w |
| Power | 3w |
| Laser Wavelength | 355nm |
| Marking Area | 150mm*150mm |
| Optional Marking Area | 100mm*100mm / 150mm*150mm/200mm*200mm / 300mm*300mm |
| Single pulse energy | >75μJ@40kHz |
| repeat frequency | 20-200kHz |
| Pulse Width | <22ns@40kHz |
| Life-span of Fiber Laser Module | 100 000hours |
| Beam Quality | M2 <1.5 |
| Focus Spot Diameter | <0.01mm |
| Output Power of Laser | 10%~100% continuously to be adjusted |
| System Operation Environment | Windows XP / W7--32/64bits / W8--32/64bits |
| Cooling Mode | Air cooling--Built-in |
| Temperature of Operation Environment | 15ºC~35ºC |
| Power Input | 220V / 50HZ or 110V / 60HZ |
| Power Requirement | <400W |
| Communication Interface | USB |
Features:
UV marking features:
Ultraviolet lasers have the benefit of other lasers that limit thermal stress. This is because most UV laser systems operate at low power.
By using a process sometimes referred to as "cold ablation," the UV laser beam produces a reduced heat affected zone that minimizes the effects of edge processing, carbonization, and other thermal stresses, while using higher power lasers. These negative effects usually exist.
Ultraviolet laser beam can reach 10-20μm
High quality laser parts of fiber laser marking machine
| ITEM | QUANTITY |
| Foot switch | 1pcs |
| US / AU/ EU power cable | 1pcs |
| USB cable | 1pcs |
| USB flash drive for program quick set up | 1pcs |
| CD with EZCAD control program | 1pcs |
| English User manual | 1pcs |
| Focus ruler | 1pcs |
| hexagon bar wrench | 1pcs |
our service:
1.details english manual book,Explain the use of machines and software. Guide the customer proper use, extend product life and reduce energy consumption.
2.English documents instruction to show you how to install the machine according each machine of order(including photos and words).
3.online remote support appointment: after receive your machine you can make appoint 24 hours before install the equipment. then our engineer supply online support when you are ready to start installment.
4. two years warranty: for small parts we can send new as free.if the parts valuable we need you send back the broken one to repair.
5.Our technician is available to your factory and offer training of how to use our machines. As well, you may send your technician to our company to learn how to operate machines.
6.We arrange final test before shipment. We run the machine without material for a few days, and then mark materials for test. After making sure machine is the best performance, then ship out the machine.
7.Our company has perfect quality assurance and after-sales service system,All products provide 2 years guarantee quality after-sales service.
