Basic Info.
Model NO.
CO2 fractional laser machine
Laser Mode
Lower Order
Laser Wavelength
10.6μm
Beam Divergence Angle
4mrad
Focused Spot Diameter
≤0.4mm
Pulse Width
0.02-0.99s
Aiming Beam
Infrared Ray (650nm, 2MW)
Beam Delivery
7 Joint-Articulated Arms
Cooling System
Inside-Circle Coolant
Humidity
<80%
Air Pressure
86kpa-106 Kpa
Electromagnet
No Electromagnet Interrupt
Preheating-Time
>5min
Other Working Environment
No Obvious Shaking or Airflow
Transport Package
Carton
Specification
144x69x74CM
Trademark
GOMECY
Origin
Beijing
Production Capacity
50000/Year
Product Description
Introduction of instrument: The medical products (CO2 fractional laser therapy instrument) are widely used in general surgery,dermatology, gynecology, ENT,
paediatrics, urology and other treatment, especially being suitable for cosmetology, eye removal, perioral wrinkles, acne scars,
surgical scars, traumatic scars and benign skin neoplasm.
CO2 fractional laser therapy device is designed and manufactured in full compliance with the relevant national standard GB11748- 1995:
"Carbon dioxide laser treatment machine", national standard GB7247.1-2001 "Safety of laser products Part 1: Equipment Classification Requirements and User's Guide ", "national Standard GB9706.1-1995 " medical Electrical equipment Part I: General Requirements for
Safety" and GB 9706.20 -2000 "medical electrical equipment - Part 2: Diagnostic and therapeutic laser equipment safety requirements "
requirements.
This manual is designed for medical and technical staff to make better use of carbon dioxide laser treatment. In this manual you will find
how to installation, commissioning, operation and maintenance of carbon dioxide laser treatment and other details of the important information.
| Working mode: | Single pulse, continuous pulse, repeated pulse Output power 40w (adjustable) | Aiming beam: | infrared ray (650nm, 2mw) |
| Input power: | 450VA | Beam Delivery: | 7 joint-articulated arms |
| Laser type: | Sealed-off CO2 laser tube/ RF laser tube | Cooling system | Inside-circle coolant |
| Laser mode: | Lower order | Humidity: | <80% |
| Laser wavelength: | 10.6μm | Air pressure: | 86KPA-106 KPA |
| Scan Pattern: | triangle/square/rectangle/diamond /line/round | Input voltage: | AC220V±10%, 50Hz AC110V±10%,60Hz |
| Beam divergence angle: | 4mrad | Electromagnet: | No electromagnet interrupt |
| Focused spot diameter: | ≤0.4mm | Preheating-time: | >5min |
| Pulse width: | 0.02-0.99s | Other working environment: | No obvious shaking or airflow |
